Last updated July 31, 2009
Home WiFi Family Brochures Services Sensors Repeaters Receivers Web Servers Wireless Output Modules Wireless I/O XRPS Family People Counting Software Contact Support What's New About	Point View USB Receiver Point View Main Features High performance 418 MHz receiver Compatible with OneSix DDE Server and OPCServer USB connection directly to a PC Powered USB port or external source ASCII radio packet data output Decodes CRC-16 error encoded radio packets and Point Six RS485 packets Type B USB connector Up to 600 ft. range Description: The Point View USB Receiver is a 418 MHz radio receiver designed to receive and decode packet data from all Point Six Transmitters. The Point View USB Receiver decodes the CRC-16 encoded packets and translates them to ASCII strings that are sent out the USB port at 19200 Baud. No hardware handshaking or command protocol is required; all data packets are decoded and transmitted serially as they are received. The Point View USB Receiver is a very low power; most USB ports provide enough power to operate the receiver. External power input (wall transformer is not included) is provided for host USB ports that cannot provide the necessary current. A simple design approach results in a low cost receiver that provides error checked ASCII data for all Point Sensors. The Point View USB Receiver is supported by the Point Six OneSix™ DDE Server Software Drivers. This makes connecting Point Six Wireless products to your PC easy. Technical Features: PARAMETER SYMBOL MIN TYP MAX UNITS Supply Voltage Vcc 5 12 16 Volts Supply Current Is 18 20 25 mA Range - - 600 - Feet Baud Rate - - 19200 - Baud Axon Return