Last updated July 31, 2009
Home WiFi Family Brochures Services Sensors Repeaters Receivers Web Servers Wireless Output Modules Wireless I/O XRPS Family People Counting Software Contact Support What's New About	Point Sensor P2P-DP Pulse-to-Packet & Packet-to-Pulse Conversion for Dual Pulse Counters/Cameras Main Features Connect up to 64 pulse generator devices to one Transceiver Converts Pulse Outputs to Point Six Radio Packets Converts Point Six Radio Packets to Dual Pulse Outputs Learns Unique ID of target counter packet RS485, 19200-Baud transmitters with Unique ID Packets are transmitted every 10-17 seconds LED indication of Packet transmission RJ45 jack for easy connection to pulse source Setup parameters are stored in internal EEPROM Packets are compatible with all Point Managers, Point Repeaters, and Point Transceivers A Point Manager can handle up to 16 Pulse Counters in logging mode, or hundreds in pass-through mode. 2.5” X 2” X 1” ABS enclosures. Description: The P2P-DP converter can be used to convert dual counter output pulses to standard Point Six radio packets or to convert standard radio packets to dual pulse output. When in pulse-input mode the P2P-DP accumulates “In” and “Out” traffic counts from dual counters by monitoring the incoming pulses. The P2P-DP is programmable to accept discrete channel outputs. The accumulated counts are converted to standard Point Six dual counter radio data packets and transmitted via the built-in RS485 transceiver every 10 to 17 seconds. When in pulse-output mode the P2P-DP learns the unique ID of the target counter radio packet generator (either a P2P-DP in pulse-input mode or another directional counter) extracts the counts and generates dual pulse output. P2P-DP converters can be connected to TZR-MA transceivers or directly to the serial port of Point Managers or directly to the RS485 ports of other P2P-DP converters to produce packet-to-pulse and pulse-to-packet conversions that are hardwired, Radio or Ethernet connected. Technical Features: PARAMETER MIN TYP MAX UNITS Supply Voltage unregulated : “V-bulk” 5.5 12 28 Volts DC Supply Current 10 12 15 mA “In” traffic pulse output pulse width (active low) - 100 - ms “In” traffic pulse input pulse width range (active low) 10 100 10000 ms “Out” traffic pulse output pulse width (active low) - 100 - ms “Out” traffic pulse input pulse width range (active low) 10 100 10000 ms “Keep-Alive” pulse output pulse width (active low) - NA - ms “Keep-Alive” pulse input pulse width range (active low) - NA - ms Pulse outputs (open drain active low) off voltage - V-bulk - Volts DC Pulse outputs (open drain active low) on voltage - - 0.2 Volts DC Enclosure 2.5” X 2” X 1” ABS Plastic - - - - Axon Return