|
Home WiFi Family Brochures Services Sensors Repeaters Receivers Web Servers Wireless Output Modules Wireless I/O XRPS Family People Counting Software Contact Support What's New About |
|
Point Sensor Temperature/Humidity 900 900 MHz Transmitter Main Features
|
 |
|
Description: The Point Sensor Temp/Humidity-900 sensor is a battery operated temperature and humidity sensor with a microprocessor controlled 900 MHz. FCC certified radio transmitter. The Point Sensor Temp/Humidity-900 sensor has an on board clock that allows it to spend most of the time in a low power quiescent state. At predetermined time intervals the clock will wake up the onboard microprocessor. Unique serial number information, linearized temperature, linearized and temperature compensated humidity data are combined with a CRC-16 error check and transmitted in a very short data packet that results in a very short transmitter on-time. This architecture allows the Point Sensor Temp/Humidity-900 sensor to consume very low energy resulting in a battery life of up to 2 years. The electronics are coated with a conformal material that provides a moisture barrier against condensation. Submersion in water is not recommended. An internal reed switch permits a user to activate the service switch with a magnet. When a magnet is swiped across the enclosure at the “Service” label, a data transmission occurs immediately and a special mark is introduced in the ID field of the transmitted data packet to indicate which sensor is in service or installation. The Sensor is shipped with the transmitter turned off (anytime the Sensor is to be shipped the transmitter should be turned off or must be placed in a shielded container to prevent interference that might cause shipping problems). The sensor is started by sliding the On/Off Switch towards the SMA antenna connection. The Point Sensor Temp/Humidity-900 sensor can be turned off by sliding the On/Off switch away from the SMA antenna connection. Technical Features:
|